Proe
In the initial stages of product design as a lot of uncertainty, designers often have no models in the work area design model but will be saved in local disk Proe, since renamed the local disk model is more convenient, more programs can directly copy the folder, Intralink in a lot less restrictions. As the progress of the project structure of the product program has gradually clear, this time on the need to model the local disk into Intralink in Proe.
According to import different products, different approaches should be adopted:
1. You sure you want to import the data types:
a) a small amount of parts and drawings
b) small assembly
c) machine
d) number of machine
2. Ensure that the assembly is no hidden part.
3. For the local model data to establish a dedicated work area.
4. In the work area to start Proe.
5. According to the data types used in different ways:
a) Open the parts and drawings
b) Open the assembly assembly
c) open the whole assembly
d) open more than one machine assembly
6. Saving to the workspace.
6.1 If it is part shall be individually preserved
6.2 If there are drawings of the drawings should be opened one by one save
If the machine 6.3, save the whole assembly
6.4 If more than one by one save multiple machine assembly machine
7. Refresh the work area.
8. Folder design model, revision and so on.
9. To check the work area of the new data into the public space.